FN America has finally entered the Micro 9 market. The FN Reflex and FN Reflex MDR are polymer-framed, 9mm micro-compact pistols designed to compete with the SIG P365, Springfield Hellcat, and similar CCW handguns. The standard Reflex is a traditional slick-top, slimline pistol; the Reflex MRD is optic-ready with a factory-milled slide.
FN Reflex: what you need to know
- Dimensions are 1-inch wide, 4.25 inches tall, 6.3 inches overall length
- Weight is just over a pound: 18.4 oz.
- 3.3 inch barrel is cold hammer-forged and target crowned
- Officially mags are 11-round and 15-round capacity, but we’ve seen 10-round versions listed as well
- The trigger breaks somewhere between 4.5 and 5 lbs
- It utilizes an internal Single Action Only (SAO) hammer
- The slide is 6.2 inches long, with the front and rear cocking serrations we now expect to on a factory gun
- It does have an accessory rail; compact lights like the TLR-7 Sub and Surefire XSC should be good to go
- Both models utilize 3-dot sights, with an orange tritium dot insert up front
- Sight radius is 5.05 inches
- The slide on the MRD version is factory-milled to utilize Holsoun K/Shield RMSc footprint optics
- The palm is in-mold stippled; front and back straps are textured in vertical scales
The following details were provided by the manufacturer:
REFLEX SPECS
- CALIBER: 9mm
- OPERATION: Internal Hammer Fired SAO
- MAG CAPACITY: 10 or 11/15 Rd.
- WEIGHT: 18.4 oz.
- BARREL LENGTH: 3.3″
- OVERALL LENGTH: 6.2″
- TWIST RATE: 1:10 RH
- HEIGHT: 4.27″
- WIDTH: 1″
- TRIGGER PULL: 4.5-5.5lb.
- SIGHT RADIUS: 5.05″
PRIMARY FEATURES
- Max-capacity micro-compact perfected for concealment
- Optics Ready (MRD variant)
- Best-in-Class Trigger
- Advanced ergonomics for control and shootability
- Cold hammer-forged, target-crowned for accuracy
- Internal hammer-fired SAO trigger
- Smooth 5-lb trigger pull
- Long-wearing PVD finish
In addition to the weapons themselves, FN America has made the Reflex Holster available. The Reflex Holster is a thin-profile, injection-molded Inside the WaistBand (IWB) rig designed to give Reflex-buyers an immediate carry option (though we expect to see numerous after-market options make themselves known soon).
FN America describes the Reflex, in part,
“The FN Reflex is capable of achieving match-grade accuracy from its a 3.3-inch cold hammer-forged barrel, which is housed within a 6.2-inch slide that has front and rear cocking serrations for easy slide racking and press checks. Both models are configured with three-dot iron sights with a tritium front night sight that aids in low light sight acquisition. Micro red dot (MRD) models have a factory-milled slide to direct mount a micro red dot in a few minutes. The optics mount features a top plate that is removed to install a micro red dot and includes mounting screws. The optic mounting system is compatible with the Shield RMSc, Holosun K-series and is capable of accepting more than six micro red dot optics with similar footprints. Configured with the smallest optics, the FN Reflex MRD is extremely low profile, making deep concealment even easier with reduced snag points under cover garments.”
Read all the latest in the News.
Want more posts like this one? Subscribe to Guns & Tactics to receive email updates and special offers direct to your inbox!
Social Links:
– The views and opinions expressed on this web site are solely those of the original authors and contributors. These views and opinions do not necessarily represent those of Guns & Tactics, the administrative staff, and/or any/all contributors to this site.
– Affiliate Disclaimer: Guns and Tactics is reader/viewer supported. This post may contain affiliate links and we may earn a small commission when you click on the links at no additional cost to you. As an Amazon Affiliate I earn from qualifying purchases.
